Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

can real dynamics reflect in motion with respect to the accuracy of the mechanism

Status
Not open for further replies.
Kishor Ananth

Kishor Ananth

Industrial
Joined
Jul 29, 2019
Messages
1
Location
IN
Hello,

When i have a moving mechanism or a rotary joint , can NX reflect the position variation of a motion in a mechanism which has 0.02mm?

when i move the mechanism 10 times in a row to the same location, can i measure any position variation in the assembly as in the real application.



 
Status
Not open for further replies.

Similar threads

CAD2015
  • Locked
  • Question Question
Get to the part location from the tree...................
Replies
5
Views
5K
NXGeek
N
nxprog
  • Question Question
Reuse assemblies in the Reuse Library
Replies
1
Views
3K
GigaManf
G
gurucallie
  • Locked
  • Question Question
Embed an EXcel file into NX 2027 so the file drives a model and stays with the model file
Replies
3
Views
3K
cowski
cowski
NXsupport
  • Locked
  • Question Question
Is there a way to make extrude dialog remember the limits options set in the dialogbox
Replies
3
Views
3K
Ammaniya
A
ppap eroni
  • Locked
  • Question Question
journal that moves in the xy plane
Replies
5
Views
6K
ppap eroni
ppap eroni

Part and Inventory Search

Sponsor

Back
Top