Amada FO-3015NT Condition explains

Rixxio · Oct 29, 2018

Hi to All..
i am new in this Laser Cutting business an i am finding really confusing understanding the cutting conditions of the software.. (Amnc03)

There is anyone that can share an explanation regarding how the commands are set up ?

i would really like to understand what : Line 1 doing?
Line 2 doing?
Line 3 ...ecc.

Thank You

GEBEM · Nov 17, 2018

Rixxio the 10 lines you see there are nothing more than your cutting conditions (Parameters) the E code in your program will select which of these lines will be active at the time laser start cutting.

LaserSpyder · Nov 19, 2018

I only use 4 of the lines, E003 for inside cuts like holes, E004 for outside cuts, E005 for intricate cuts like letters and E010 for etching [auto]

IvanBr · Jan 11, 2019

hi,E9 is for burning folie if you work like that,other rows are used for step piercing,E1 you use when you need to cut for example 4mm hole in 10mm thick steel

Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Amada FO-3015NT Condition explains

Rixxio

Industrial

GEBEM

Industrial

LaserSpyder

Materials

IvanBr

Mechanical

Similar threads

Part and Inventory Search

Sponsor