Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to plot the mesh of the model in ANSYS CFD-Post (Workbench 18.1)

Status
Not open for further replies.
andradesilva

andradesilva

Materials
Joined
Jun 20, 2017
Messages
125
Location
PT
Hi all,

I am doing R&D work on a company, and I am using ANSYS Workbench. In CFD-Post, I would like to graphically pick points to probe results on. The problem is that the points I am picking do not belong to the mesh (i.e., they are not nodes). How can I plot the mesh, so I can pick points that belong to the mesh?

I am using ANSYS Workbench 18.1 polyflow module on windows 10 x64


Thanks in advance,
AndradeSilva
 
Status
Not open for further replies.

Similar threads

X
  • Locked
  • Question Question
ANSYS mechanical : How to read the dimensions which are defined as function of other dimensions in UGNX as parameters in ANSYS?
Replies
0
Views
1K
xinyu3liu
X
H
  • Locked
  • Question Question
how to apply triangular load on an area, in ANSYS Workbench static module
Replies
1
Views
3K
karachun
karachun
Anurag K
  • Question Question
Hydrostatic bearing CFD analysis
Replies
1
Views
357
karachun
karachun
A
generating mesh
Replies
2
Views
7K
Ahmad_f88
A
struclearner
  • Locked
  • Question Question
Reaction Force Distribution in ANSYS Workbench!
Replies
0
Views
1K
struclearner
struclearner

Part and Inventory Search

Sponsor

Back
Top