Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
EMC Design 1
- Thread starter Atarek
- Start date
-
1
- #2
?? That's the range of values for the component.
TTFN (ta ta for now)
I can do absolutely anything. I'm an expert! faq731-376 forum1529 Entire Forum list
TTFN (ta ta for now)
I can do absolutely anything. I'm an expert! faq731-376 forum1529 Entire Forum list
Yep.
Just a bit further down the same page is given an example where the L0 inductor was selected to be 560nH, leading to a convenient calculated value for the C0 capacitor of 220pF.
If you have time to await delivery, you can order MFRC522 RFID modules from eBay sellers for a couple of dollars, including some RFID tags (typically one card and one key-ring tag). They might provide a useful example.
Just a bit further down the same page is given an example where the L0 inductor was selected to be 560nH, leading to a convenient calculated value for the C0 capacitor of 220pF.
If you have time to await delivery, you can order MFRC522 RFID modules from eBay sellers for a couple of dollars, including some RFID tags (typically one card and one key-ring tag). They might provide a useful example.
- Thread starter
- #4
- Status
Similar threads
- Locked
- Question
- Locked
- Question