I have some Nickel Silver NS106 Temper 3 press formed and turned parts which are tarnished a gold / brown colour. The required colour/finish is silver. I believe you can acid dip the parts to achieve this. Does anyone have any specific experience with this and can give advice on specifics of the acid dipping process required. What causes this tarnished finish in the first place.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Nickel Silver NS106 Temper 3
- Thread starter PAC
- Start date
Similar threads
- Question
- Locked
- Question
