Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations Danlap on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Nickel Silver NS106 Temper 3

Status
Not open for further replies.

PAC

Mechanical
May 18, 1999
7
I have some Nickel Silver NS106 Temper 3 press formed and turned parts which are tarnished a gold / brown colour. The required colour/finish is silver. I believe you can acid dip the parts to achieve this. Does anyone have any specific experience with this and can give advice on specifics of the acid dipping process required. What causes this tarnished finish in the first place.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor