Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

HV=220 of steel 37 sheet , does full annealing work and make the hardness reach to 140 ? 1

Status
Not open for further replies.

AhmedDeiaa

Mechanical
Joined
Nov 1, 2014
Messages
29
Location
EG
HV=220 of steel 37 sheet , does full annealing work and make the hardness reach to 140 ?
 
Yes, full annealing of this low carbon steel grade should reduce the hardness from 220 HV to approximately 140 HV.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top