Plate and Laminate Element Offsets

stressebookllc · Nov 17, 2015

Dear Learned Colleagues:

I have seen some threads related to plate and laminate element offsets and decided to discuss the topic in some detail here:

http://www.stressebook.com/plate-and-laminate-element-offsets1/

But I was wondering if you have any more suggestions to improve the study I have done in the post?

Are offsets an issue in Skin Panels to Stringer Joint fatigue analysis?

Aerospace Stress Analysis and FEA Courses

http://www.stressebook.com

Stressing Stresslessly!

rb1957 · Nov 17, 2015

yes, deviation in the load CG is very significant (or can be)

another day in paradise, or is paradise one day closer ?

Burner2k · Nov 20, 2015

Stressebookllc,
The link to your blog post isn't working. Getting a 404 error. Please recheck. I am interested in this topic

stressebookllc · Nov 20, 2015

Burner, can you check it again? Maybe it was a temporary glitch.

Aerospace Stress Analysis and FEA Courses

http://www.stressebook.com

Stressing Stresslessly!

Burner2k · Nov 20, 2015

Seems to be working now.

Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Plate and Laminate Element Offsets

stressebookllc

Aerospace

rb1957

Aerospace

Burner2k

Aerospace

stressebookllc

Aerospace

Burner2k

Aerospace

Similar threads

Part and Inventory Search

Sponsor