vendor to plate large plastic parts
vendor to plate large plastic parts
(OP)
I need a vendor that can chrome plate ABS bumper covers. The parts are very long about 6.5 ft. I would like someone with a tank deep enough to run the parts with a verticle orintation. They should obviously have automotive expereince.
TIA
TIA
RE: vendor to plate large plastic parts
Cheers
Greg Locock
RE: vendor to plate large plastic parts
RE: vendor to plate large plastic parts
RE: vendor to plate large plastic parts
http://www.pfonline.com/
RE: vendor to plate large plastic parts
They have a good plating plant in Evansville Indiana.
They chrome alot of abs grille for the automotive industry, including the big truck grilles (freightliner).
Chris
RE: vendor to plate large plastic parts
Do you have a contact name there? I have not had good luck trying to find someone there over the phone.
everyone
For more detail I need someone with tanks deep enough for parts 76" long. I would prefer they were racked verticlely. They have a V section that traps air if racked horizontaly.
TIA
RE: vendor to plate large plastic parts
23751 Amber Street
Warren, MI 48089
1-810-757-7800
1-810-757-8329 (fax)