Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Pressure Vessel Nozzle w/ Moments

Status
Not open for further replies.
dskjockey1

dskjockey1

Mechanical
Joined
Jan 17, 2012
Messages
12
Location
US
I am new to using simulation and trying to analyze a nozzle in a 2:1 head configuration. The end of the nozzle is subjected to various forces and moments due to piping.
There is no issues with modeling the forces but I am not sure how to apply the moments. Currently I have treated them as forces that are a specific distance from the point of loading (i.e. moment = force x distance). Is there a way I can apply the moments at the nozzle to shell juncture? Or must I continue to apply a force at a specific distance to simulate a moment?

Thanks!
 
Status
Not open for further replies.

Similar threads

IdanPV
  • Locked
  • Question Question
Apply Moments in Solidworks Simulation
Replies
2
Views
2K
IdanPV
IdanPV
lpresciuttini
  • Locked
  • Question Question
Pressure Vessel Linearization (Simulation): Invalid points
Replies
1
Views
1K
IdanPV
IdanPV
FPPE
  • Locked
  • Question Question
Pressure Vessel Linearization (Simulation): Invalid points
Replies
1
Views
588
IdanPV
IdanPV
FPPE
  • Locked
  • Question Question
Apply pressure to multiple faces on SolidWorks Simulation
Replies
0
Views
277
FPPE
FPPE
samim09me
  • Locked
  • Question Question
How Solidworks Motion Analysis function builder are used with examples
Replies
0
Views
963
samim09me
samim09me

Part and Inventory Search

Sponsor

Back
Top