How to do static stress analysis on pipe.

Question

How to do static stress analysis on pipe.

ecb88 (Mechanical)

(OP)

29 Feb 12 11:56

I'm pretty new to using the simulation part of Solidworks. Basically what I have is a pipe fixed at one end, and it has a displacement of 'x' inches at the other end. Is there a way I can run an analysis on how much stress there is by simply inputting the displacement of the free end?

morienr (Mechanical) · Answer 1 · 2012-03-02 14:35:42

Instead of applying a load opposite the fixed end, you could use advanced fixtures by selecting the direction the pipe will deflect and enter the deflection value in the translations box.

kellnerp (Mechanical) · Answer 2 · 2012-03-03 14:56:10

Simply use a non-zero x constraint at the opposite end. Only constrain the x direction.

TOP
CSWP, BSSE
www.engtran.com www.niswug.org
www.linkedin.com/in/engineeringtransport
Phenom IIx6 1100T = 8GB = FX1400 = XP64SP2 = SW2009SP3
"Node news is good news."

Come Join Us!

Posting Guidelines

How to do static stress analysis on pipe.