Amada "Per head focal point"
Amada "Per head focal point"
(OP)
Hi Guys,
I hope someone here can assist with this one
machine Amada FO with auto focus
I wish to turn on the "Per head focal point" option.
This option switches off the "Focal point base position" in the custom laser parameter page.
Then enables the "Per head focal point positions" in the AIVision (OVS) page.
You do not need the AIV camera to switch this on.
I have attached a Doc from the Amada manual to clarify this.
Many thanks for your help.
Cheers
I hope someone here can assist with this one
machine Amada FO with auto focus
I wish to turn on the "Per head focal point" option.
This option switches off the "Focal point base position" in the custom laser parameter page.
Then enables the "Per head focal point positions" in the AIVision (OVS) page.
You do not need the AIV camera to switch this on.
I have attached a Doc from the Amada manual to clarify this.
Many thanks for your help.
Cheers
RE: Amada "Per head focal point"
I found the hidden parameter menu to enable it.
Works perfect now.
Thanks