Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

A120-84

Status
Not open for further replies.
dfru

dfru

Mechanical
Nov 16, 2004
3
Where can I find a copy of A120-84?

More specifically, I am interested in the allowable wall thickness for pipe under the A120-84 standard. Also, the allowable tensile strength, and percentages of constituents.
 
Replies continue below

Recommended for you

Sort by date Sort by votes
ASTM A120 was discontinued in 1987 and replaced by A53. If you specifically need the A120 spec. you might check a local technical library for an old ASTM volume (we purged our library last year of our older volumes, so can't send you one..sorry) or you can contact ASTM at and they can probably get you a copy from their archives. They usually charge about $10 to $15 for individual standards.

Regarding minimum thicknesses and constituents, these will depend upon the diameter and grade of the pipe you want.

Good luck.
[sig][/sig]
 
Upvote 0 Downvote
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top Bottom