Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

A120-84

Status
Not open for further replies.
dfru

dfru

Mechanical
Joined
Nov 16, 2004
Messages
3
Location
US
Where can I find a copy of A120-84?

More specifically, I am interested in the allowable wall thickness for pipe under the A120-84 standard. Also, the allowable tensile strength, and percentages of constituents.
 
Sort by date Sort by votes
ASTM A120 was discontinued in 1987 and replaced by A53. If you specifically need the A120 spec. you might check a local technical library for an old ASTM volume (we purged our library last year of our older volumes, so can't send you one..sorry) or you can contact ASTM at and they can probably get you a copy from their archives. They usually charge about $10 to $15 for individual standards.

Regarding minimum thicknesses and constituents, these will depend upon the diameter and grade of the pipe you want.

Good luck.
[sig][/sig]
 
Upvote 0 Downvote
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top