Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Split - Catia V5

Status
Not open for further replies.

Guest
Hello:

In PartDesign, if I have a green Body, a red suface and do a Split of the body, at the end we still have a green body. There is any way to keep the red colour at the solid splited face.

Thanks in advance.

 
Replies continue below

Recommended for you

Sort by date Sort by votes
Just right click the "Split.1" object in the specification tree and select properties and then select the graphics tab. Change the color to red. Now you should have a green body with a red split surface on it.
 
Upvote 0 Downvote
You should try a knowledge expert rule to set the color of each split the same as the split-parent...

I can set color to GSD element but I have Pb to set color for solide element...

Let me know if you find something..

Eric
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

A
  • Question
CATIA v5 DRAFTING
Replies
5
Views
7K
amadali
A
R
  • Question
Catia V5 Kinematic suspension assembly help 1
Replies
0
Views
2K
Ronron46
R
A
  • Question
CATIA V5 DRAFTING/DRAWING TITLE BLOCK SCALE UPDATE 1
Replies
5
Views
4K
amadali
A
S
  • Locked
  • Question
Userpattern CATIA V5 / 3DX
Replies
1
Views
2K
ferdo
ferdo
J
  • Question
CATIA V5 Macro - Material Database CreateAnalysisData() Parameter
Replies
0
Views
2K
jmerhar312
J

Part and Inventory Search

Sponsor

Back
Top Bottom