Split - Catia V5

Hello:

In PartDesign, if I have a green Body, a red suface and do a Split of the body, at the end we still have a green body. There is any way to keep the red colour at the solid splited face.

Thanks in advance.

 

[rkline]

Just right click the "Split.1" object in the specification tree and select properties and then select the graphics tab. Change the color to red. Now you should have a green body with a red split surface on it.

 

[itsmyjob]

You should try a knowledge expert rule to set the color of each split the same as the split-parent...

I can set color to GSD element but I have Pb to set color for solide element...

Let me know if you find something..

Eric