Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

essential variable for wps of carbon steels

Status
Not open for further replies.
fazel2

fazel2

Materials
Joined
Nov 21, 2008
Messages
16
Location
IR
Can we use pqr of CJP V groove type for other groove type(e.g double V- groove or single bevel and... ( square- groove is excluded)) in WPS of CJP groove welds ?
 
Sort by date Sort by votes
Yes.

The requirements are a little different between AWS D1.1 and ASME Section IX. You can reference Table 4.5 - General section in D1.1 for groove type.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

mr_inspectorpants
  • Locked
  • Question Question
AWS D1.1 Prequalified Essential Variables
Replies
3
Views
3K
gtaw
gtaw
naquib
  • Locked
  • Question Question
WPS Qualification AWS D1.1 2020, Box to Box WPS Sample
Replies
0
Views
2K
naquib
naquib
Marshall Clark
  • Locked
  • Question Question
Prequalified WPS for 3G/4G
Replies
0
Views
895
Marshall Clark
Marshall Clark
deepu78
  • Locked
  • Question Question
WPS & PQR approval
Replies
2
Views
1K
david339933
david339933
krator33
  • Locked
  • Question Question
AWS D1.1 Delivery condition in not listed materials. Essential variable?
Replies
1
Views
407
gtaw
gtaw

Part and Inventory Search

Sponsor

Back
Top