Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

cage to slip ring

Status
Not open for further replies.

kunalw

Electrical
Joined
Apr 21, 2000
Messages
22
Location
IN
how to go for cage to slpring.<br>procedure is required .<br>thanking you for responding
 
The Slipring motor has better torque caracteristics than cage motor.So Slip motor can definately replace cage motor.But you will have to intall a manul/Auto 3 or 4 steps starter for Slipring motor rotor. <br><br>Regards <br>Khalid Khan
 
The Slipring motor has better torque caracteristics than cage motor.So Slip motor can definately replace cage motor.But you will have to intall a manul/Auto 3 or 4 steps starter for Slipring motor rotor. <br><br>Regards <br>Khalid Khan
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top