Vector controls in induction machine
Vector controls in induction machine
(OP)
Surabaya, 14 June 2000
For the first I want to introduce my self
My name is Henry Leatemia
I come from surabaya, Indonesia
Now I study in Petra christian university
My major is Electrical engineering
My project in university is study about vector control in induction machine
I have problem to design the model induction machine in matrix equation
My problem include how to have this paramater :
1. Magnetizing inductance ( Lm)
2. Self and leakage inductances of the stator respectively ( Ls, Lsl )
3. Self and leakage inductances of the rotor respectively ( Lr, Lrl )
4. Resistances of a stator and rotor phase winding respectively ( Rs,Rr)
My motor induction specification is :
Squirrel cage induction motor , 3 phase, 1.5 HP, 1400 r/min 1.9/1.1 A(line /phase current),2 pole, cycles 50 Hz Vline 220/380 V.
I wish any of you can help me to solve this problem or give me direction how to solve it.
Thanks you very much of all of your antention.
Sincerely yours
Henry.Leatemia
For the first I want to introduce my self
My name is Henry Leatemia
I come from surabaya, Indonesia
Now I study in Petra christian university
My major is Electrical engineering
My project in university is study about vector control in induction machine
I have problem to design the model induction machine in matrix equation
My problem include how to have this paramater :
1. Magnetizing inductance ( Lm)
2. Self and leakage inductances of the stator respectively ( Ls, Lsl )
3. Self and leakage inductances of the rotor respectively ( Lr, Lrl )
4. Resistances of a stator and rotor phase winding respectively ( Rs,Rr)
My motor induction specification is :
Squirrel cage induction motor , 3 phase, 1.5 HP, 1400 r/min 1.9/1.1 A(line /phase current),2 pole, cycles 50 Hz Vline 220/380 V.
I wish any of you can help me to solve this problem or give me direction how to solve it.
Thanks you very much of all of your antention.
Sincerely yours
Henry.Leatemia
RE: Vector controls in induction machine
This is a forum for practicing engineers. To provide assistance to a student learning to solve problems would be to do that student a disservice. It's your responsibility to learn how to solve problems of this nature. Please do not post in the forums looking for answers to school problems. Good luck.