Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
source for stamped metal contacts
- Thread starter mitch8484
- Start date
I have a vender off-shore that does stamping for that very thing.
Heckler
Sr. Mechanical Engineer
SWx 2007 SP 3.0 & Pro/E 2001
XP Pro SP2.0 P4 3.6 GHz, 1GB RAM
NVIDIA Quadro FX 1400
o
_`\(,_
(_)/ (_)
(In reference to David Beckham) "He can't kick with his left foot, he can't tackle, he can't head the ball and he doesn't score many goals. Apart from that, he's all right." -- George Best
Heckler
Sr. Mechanical Engineer
SWx 2007 SP 3.0 & Pro/E 2001
XP Pro SP2.0 P4 3.6 GHz, 1GB RAM
NVIDIA Quadro FX 1400
o
_`\(,_
(_)/ (_)
(In reference to David Beckham) "He can't kick with his left foot, he can't tackle, he can't head the ball and he doesn't score many goals. Apart from that, he's all right." -- George Best
apdesign
Mechanical
- Aug 21, 2006
- 21
Why not just use one of the connector company's standard contacts? Molex/Tyco, etc have a large variety of standard contacts that you could probably design into your part
Otherwise, you just go to a precision sheetmetal stamping house and have them make a custom die that meets your design. If you need contacts in the New York metro area, I can help.
Otherwise, you just go to a precision sheetmetal stamping house and have them make a custom die that meets your design. If you need contacts in the New York metro area, I can help.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
