Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

modeling a steel shear wall with ANSYS 1

Status
Not open for further replies.
amirhosein

amirhosein

Structural
Joined
Feb 4, 2002
Messages
1
Location
IR
Hi
I want to model a steel shear wall using Ansys but there are some problems :
first which way is better to model the side beams and colomns and how can I join the plate and beams and colomns?

how can I model the buckling and postbuckling of the plate
and nonlinear response of it?

thanks
 
Status
Not open for further replies.

Similar threads

M
  • Question Question
FEA Adhesive Modeling
Replies
3
Views
5K
milio000
M
vanji1
  • Locked
  • Question Question
If I want to construct myself a geometric stiffness matrix induced by a pre constraint with finite element modeling
Replies
0
Views
1K
vanji1
vanji1
T
Thermal load with thermal gradient in a structure analysis with FEM
Replies
1
Views
383
SWComposites
SWComposites
YuJie_PV
  • Question Question
1/2 loading for 1/2 model in ansys?
Replies
9
Views
10K
YuJie_PV
YuJie_PV
G
  • Question Question
FEA Simulation of a Piezoelectric Accelerometer with Frequency Response Analysis
Replies
2
Views
9K
gnana_235
G

Part and Inventory Search

Sponsor

Back
Top