Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Roadway as Custom Weir
- Thread starter Granny36
- Start date
A custom weir can be used to model an arbitrary weir cross-section. For example, to define a trapezoidal flow section over a road you might use:
Line#1: Head=0', Width= level section of roadway
Line#2: Head=1', Width= flow width with 1' of head
For other shapes, use as many head/width values as required to define the cross-section.
Line#1: Head=0', Width= level section of roadway
Line#2: Head=1', Width= flow width with 1' of head
For other shapes, use as many head/width values as required to define the cross-section.
- Status
Similar threads
- Locked
- Question
- Locked
- Question