Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

A286 screws and there appropriate torque value with nickel-teflon coa 2

Status
Not open for further replies.

theomaggie

Electrical
Joined
Oct 1, 2001
Messages
1
Location
US
I am currently working a project which nessesitates A286 metric socket head cap screw being coated w/ Nitef coating and torqued to 35-45 in-lbs.

We are having a high failure rate before reaching 45 lbs.

Alternatives or solutions out there ?
 
What size bolt is it? M4 or smaller and you've exceeded the recommended seating torque according to the guide I have, which lists UTS as 189 ksi for the alloy steel used in the guide. According to my information, A286 has an UTS of 146 ksi, which means your torque should be even lower. Andy
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top