Source of design info. for flat belt rollers.

Question

Source of design info. for flat belt rollers.

IM3D (Mechanical)

(OP)

20 Sep 01 22:54

Hi There,

I've been recently assigned a project for a high precision belt based printing system. Problem is I have no belt system design experience. Can someone lead me to a good source (book?) on pulley design for flat belt systems. Also does anyone have a source for belt weave calculations. This system is very sensitive to belt weave.

Thanks in advance,

Rob

**guest0821** (visitor) · Answer 1 · 2001-10-31 13:44:51

dear sir
could u help me to design this belt
power=.75hp or 1hp
velocity=.25
we have som datas:
pully(1):which connected to the motor(small pully)
d1=115mm
n1=?
pully(2):which conected to the machine(bigger pully)
d2:?
n2:?

please can i know the mising datas(n1,n2,d2,t1,t2)and the lenght of the belt and the width

from :alfaisalk@hotmail.com

RIVetron (Mechanical) · Answer 2 · 2002-01-03 11:18:26

You can do a search for belting using any of several search engines on the Internet.
Some quick references are as follows:

www.brecoflex.com
www.habasit.com

These are belting suppliers, and as such have extensive knowledge of rollers, and related applications.

Hope this is helpful!

Paul R

Come Join Us!

Posting Guidelines

Source of design info. for flat belt rollers.