Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Source of design info. for flat belt rollers.

Status
Not open for further replies.

IM3D

Mechanical
Sep 20, 2001
1
Hi There,

I've been recently assigned a project for a high precision belt based printing system. Problem is I have no belt system design experience. Can someone lead me to a good source (book?) on pulley design for flat belt systems. Also does anyone have a source for belt weave calculations. This system is very sensitive to belt weave.

Thanks in advance,

Rob
 
Replies continue below

Recommended for you

dear sir
could u help me to design this belt
power=.75hp or 1hp
velocity=.25
we have som datas:
pully(1):which connected to the motor(small pully)
d1=115mm
n1=?
pully(2):which conected to the machine(bigger pully)
d2:?
n2:?

please can i know the mising datas(n1,n2,d2,t1,t2)and the lenght of the belt and the width


from :alfaisalk@hotmail.com
 
You can do a search for belting using any of several search engines on the Internet.
Some quick references are as follows:


These are belting suppliers, and as such have extensive knowledge of rollers, and related applications.

Hope this is helpful!

Paul R
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor