Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Zero Current on phase 3 of Merlin Gerin Masterpact circuit breaker

Status
Not open for further replies.
albarkani

albarkani

Electrical
Joined
Jan 18, 2009
Messages
13
Location
SA
Dear Guys,
I have Merlin Gerin Masterpact NW 2500A circuit breaker and the trip uint is micrologic 2.0A

THE PROBLEM IS THAT:
WHEN WE CLOSE THE CB ON THE GENERATOR IT GIVE US ZERO CURRENT ON PHASE 3 ??

any suggestion??
 
Sort by date Sort by votes
Good to hear it was solved, was it the finger clusters as I mentioned early in this thread or an internal connection?
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

cyriousn
  • Locked
  • Question Question
Max amount of Breakers on 34.5kv bus with no Main Circuit Breaker
Replies
3
Views
4K
wcaseyharman
wcaseyharman
rockman7892
  • Question Question
L-G Fault Zero Sequence Current in un-faulted phases
Replies
7
Views
4K
waross
waross
bdn2004
  • Question Question
Analyzing a 3-phase fault recorded waveform from an SEL relay on a 15kV feeder breaker, when did the breaker trip, why is VB at 0V before the fault ?
Replies
3
Views
10K
bdn2004
bdn2004
simonfr
  • Locked
  • Question Question
LO/TO - remote circuit breaker
Replies
6
Views
5K
PersonalProfile
PersonalProfile
N
  • Question Question
Earthing of neutral on single phase transformer
Replies
2
Views
734
waross
waross

Part and Inventory Search

Sponsor

Back
Top