Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Y Stress factor without a hub

Status
Not open for further replies.
chris456s

chris456s

Structural
Joined
Feb 2, 2017
Messages
50
Location
SG
In BPVC VIII.2- Section 4.16
Stress listed on Table 4.16.8 for "loose-type flange without a hub" includes a "Y" stress factor.
Stress factors for all other types of flanges are listed on tables 4.16.4 and 4.16.5.
However, neither of these tables list "loose-type without a hub".
Where is the calc for the "Y" stress factor for "loose-type flange without a hub"?

 
Status
Not open for further replies.

Similar threads

nashki
  • Question Question
Thickness Hub at the Small End, g0
Replies
5
Views
8K
r6155
r6155
bck2ftr
  • Question Question
ASME B16.9 - factor f for proof test
Replies
3
Views
11K
goutam_freelance
goutam_freelance
aiwa7777
  • Locked
  • Question Question
Membrane Stress
Replies
2
Views
2K
aiwa7777
aiwa7777
T
  • Question Question
Figure 323.2.2-2 (Reduction in Lowest Exemption Temperature for Steels Without Impact Testing) of ASME B31.3
Replies
0
Views
7K
Tommy2025
T
jayinwww
  • Question Question
Calculating Stress Ratio ASME B31.3 Figure 323.2.2A Note 6
Replies
0
Views
426
jayinwww
jayinwww

Part and Inventory Search

Sponsor

Back
Top