Hi guys,
Could anyone direct me to the correct standard I should use to design a 1'' NPT stainless Y strainer (shell wall thickness) for steam service? From a quick look around it would appear that B16.34 would be the closest match, but would using B31.3 for example be an acceptable approach? Or perhaps there is another more suitable standard?
Thanks in advance for your help.
Rafal
Could anyone direct me to the correct standard I should use to design a 1'' NPT stainless Y strainer (shell wall thickness) for steam service? From a quick look around it would appear that B16.34 would be the closest match, but would using B31.3 for example be an acceptable approach? Or perhaps there is another more suitable standard?
Thanks in advance for your help.
Rafal
