Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

xref-layers

Status
Not open for further replies.

dodgese

Structural
Joined
Jun 19, 2002
Messages
2
Location
US
I can't freeze layers on x-refs. When I click a layer to freeze the x-ref it freezes the entire x-ref and not the layer itself. I have other coleagues here that can freeze the layers of an x-ref. Which option/command do I need to use to remedy this?
Using AutoCad 2000.
 
Are you using the 'Express tools' layer freeze facility (LAYFRZ) or some other method? I was just wondering because I've not had a problem with this particular Express Tools command before.

If you ARE using express tools, have you tried unloading & reloading these menus to see if it's just a glitch that can be rectified by reloading?

Regards

Marc
 
Maybe the rest of that particular Xref is blocks, the insertion points of which are on the layer you freeze.

Please try with some simple dwg as XREF. This problem should not occur when you freeze layers on layers properties dialog box.
 
It turns out that I needed to use the Options in LAYFRZ. LAYFRZ in Express tools needs the option "entity level nesting" selected to be able to individually freeze layers in an x-ref. If the options is set to none, it treats the x-ref like a whole entity.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top