I have a block with attribute text which has been exploded not bursted. When I xref or insert as a block the file with the exploded block and attribute text, the attribute text only is invisible. Is there some way to make the attribute text visible again when the file is xref'd or inserted as a block?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
XREF EXPLODED A BLOCK WITH ATTRIBUTE TEXT
- Thread starter RocketPwr
- Start date
CADSTUDENT
Mechanical
Rocketpwr
When you use ATTDEF Command, Autocad bring up the Attribute Definitions dialog box and look under mode area there a invisible option. If you want the attribute to be shown with the inserted block, leave the Invisible check box inactive. If you active this check box, the attribute will not be displayed when the block is inserted. Hope this helps - John
When you use ATTDEF Command, Autocad bring up the Attribute Definitions dialog box and look under mode area there a invisible option. If you want the attribute to be shown with the inserted block, leave the Invisible check box inactive. If you active this check box, the attribute will not be displayed when the block is inserted. Hope this helps - John
- Status
Similar threads
- Locked
- Question