sikridheeraj
Mechanical
Do XM19 stems are more superior than SS316 & SS316L. we are having a requirement for fertilizer plant for urea application.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
XM19 vs SS316 & SS316L for stems in gate valves
- Thread starter sikridheeraj
- Start date
- Status
EdStainless
Materials
Nitronic 50 (S20910) will have slightly better corrosion resistance than 316L, and it is often used in the cold worked condition at high strength. These alloys also have superior galling resistance, I would prefer Nit50.
= = = = = = = = = = = = = = = = = = = =
P.E. Metallurgy, Plymouth Tube
= = = = = = = = = = = = = = = = = = = =
P.E. Metallurgy, Plymouth Tube
- Status
Similar threads
- Question
- Locked
- Question