Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

XHE 48 and IPO 13 cable parameterst

Status
Not open for further replies.

zelvica

Electrical
Joined
May 11, 2004
Messages
10
Location
SI
Hello!

Does any one know any web site where I could find cable parameters (sequence impedances) about these cables:
-XHE 48,49
-IPO 13,14

I know the values depend on different factors such as ground resistance, how the cables are laid and how far apart they are but anyway I need at lest some referential values.

Thanks, zelvica
 
To tell you the truth I don't have that information(these cables are rather old and the information about manufacturer is not documented). All I know is the type of cables. Is such a big difference between parameters of cables from different manufacturers that you are asking about that?

Thanks,
zelvica
 
What I actually meant was to contact the manufacturer of the cable. But, you said the info is not available anymore.
I am not familiar with the names you've provided. The best would be to contact a cable manufacturer in your country and ask if they can help you, or to describe the cable, maybe someone on the forum can help you. Some cable manufacturers are:


Unfortunately I do not think you'll find the data you're looking for on their sites. You'll have to contact them to obtain it.

Regards
Ralph
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top