Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Wrought aluminium

Status
Not open for further replies.
jimnees

jimnees

Aerospace
Joined
Dec 19, 2001
Messages
5
Location
GB
We are tying to determine strength data for Wrought Titanium. Does anyone know what the differences between a cold forged titanium and a Wrought Titanium are? Also, would using a heat forged Aluminium, value be acceptable?
Thanks,
Jim
 
Sort by date Sort by votes
Jim:
Have you looked at MIL-T-9046 and MIL-T-9047? They should give you strength values for both wrought and forged titanium.
 
Upvote 0 Downvote
You can't use the wrought aluminum values for titanium. Titanium is much stronger than aluminum alloys--check the ASM desk reference handbook for metal tensile values etc. You can also contact their website for information--
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Carl84
  • Locked
  • Question Question
grain direction detection in aluminium tubing
Replies
11
Views
821
Compositepro
Compositepro
Prophet01
  • Locked
  • Question Question
Aluminium corrosion in soil
Replies
8
Views
2K
SwinnyGG
SwinnyGG
dogbural
  • Locked
  • Question Question
aluminium sand cast DA 601 suffering oxidation
Replies
4
Views
349
dogbural
dogbural
Uralsk
  • Locked
  • Question Question
Galling resistant aluminium alloy grades?
Replies
10
Views
767
WKTaylor
WKTaylor
Uralsk
  • Locked
  • Question Question
Galling resistant aluminium alloy grade ?
Replies
6
Views
714
MC6
MC6

Part and Inventory Search

Sponsor

Back
Top