Writing Subscript in AutoCAD

[sammysparkle]

Friends,

Please I would appreciate if any of the members can assist me with information on how to write text with subscript in AutoCAD. I'm familiar with writing text with superscript.

Thanks so much in advance!

 

[VMichl]

Sammysparkle,
there are several ways to do this - but it is the same principle as with superscripts. See e.g.:

http://www.cadforum.cz/cadforum_en/qaID.asp?ID=1719

Vladimir Michl, Xanadu,

http://www.xanadu.cz