Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Write Shear Modulus in Abaqus

Status
Not open for further replies.
JosephX

JosephX

Aerospace
Joined
Nov 22, 2012
Messages
11
Location
US
Hi all

I am thinking that how can I write the Value of Shear Modulus in Material selection of Abaqus. Will it automatically be defined after I write the Young's Modulus and Poisson's ratio? Thanks.

Regards,
Joseph
 
Sort by date Sort by votes
Yes Shearmodulus=Youngmodulus/2(1+poisson's ratio) so no need to define it in the case of isotropic material.
 
Upvote 0 Downvote
Thanks for confirming this. Shingouz

 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

A
  • Locked
  • Question Question
Unstable Reaction Force and Unrealistic Elastic Modulus in Abaqus HPC Simulation
Replies
1
Views
2K
FEA way
FEA way
I
  • Question Question
Wear in abaqus
Replies
8
Views
15K
Rama27
R
L
  • Locked
  • Question Question
VUSDFLD subrotine ABAQUS : Varying Young's Modulus with an equation
Replies
1
Views
2K
FEA way
FEA way
Bishal123
  • Locked
  • Question Question
ABAQUS shear strain rate
Replies
1
Views
465
FEA way
FEA way
jball1
  • Question Question
Accumulation of error in Abaqus Explicit?
Replies
4
Views
711
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top