Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

WRC-297 Curve Fit? 1

Status
Not open for further replies.
meca

meca

Structural
Joined
Jul 28, 2000
Messages
128
Location
US
Does anyone know if the graphical curves in WRC 297 have been curve fit and converted into formulas?
 
Sort by date Sort by votes
Certainly not officially.
I did this and you may use and test the result (not the curves themselves) in the site below under Vessels -> WRC


prex
motori@xcalcs.com
Online tools for structural design
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

sarawana
  • Locked
  • Question Question
WRC 297 Limitation on Dn/Tn ratio
Replies
1
Views
594
DriveMeNuts
DriveMeNuts
YuJie_PV
  • Locked
  • Question Question
ASME VIII-1 Figure UCS-66.3 (b)and curve selection
Replies
8
Views
769
YuJie_PV
YuJie_PV
YuJie_PV
  • Locked
  • Question Question
Regarding the Fatigue S-N curve in ASME VIII-2 Annex 3-F
Replies
4
Views
909
IdanPV
IdanPV
AH_AK
  • Locked
  • Question Question
Smooth Bar S-N Curves (VIII.2-3-F.1.2)
Replies
2
Views
625
AH_AK
AH_AK
swiftworks
  • Locked
  • Question Question
7500 PSIG Hydro Test w/ 6M SA-105 Fittings (b31.3 and b16.11)
Replies
5
Views
751
swiftworks
swiftworks

Part and Inventory Search

Sponsor

Back
Top