Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
wood and metal plated truss specs
- Thread starter cmbyrd77
- Start date
OldPaperMaker
Structural
The 2009 IBC has a section, 2303.4 Trusses outlines what needs to be provided (design, drawings, etc). It also referres to TPI 1 specifications. I believe that TPI 1 can be found on line.
I hope that this helps.
I hope that this helps.
woodman88
Structural
- Oct 23, 2009
- 1,020
At they show in the Basic Table of Contents pdf
"02/11 061753 SHOP-FABRICATED WOOD TRUSSES Metal-plate-connected members"
Garth Dreger PE - AZ Phoenix area
As EOR's we should take the responsibility to design our structures to support the components we allow in our design per that industry standards.
"02/11 061753 SHOP-FABRICATED WOOD TRUSSES Metal-plate-connected members"
Garth Dreger PE - AZ Phoenix area
As EOR's we should take the responsibility to design our structures to support the components we allow in our design per that industry standards.
- Status
Similar threads
