Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Wireframe Extraction from Solid or Model answering thread560-56141 4

Status
Not open for further replies.
weagan22

weagan22

Aerospace
Joined
Aug 27, 2015
Messages
81
Location
US
thread560-56141

Just needed to do this and found a good way to extract all of the edges from a solid.

1. Search using "CTRL+F"

2. Under the 'Advanced' tab set the 'Workbench' = 'Topology' and the 'Type' = 'Edge'.

3. Look in the area to would like i.e. 'Visible on Screen'.

4. "Search and Select" the edges in the desired area.

5. With all of the edges selected, select the 'Extract' tool and all of the edges will be extracted.

6. Hit 'OK'

Done!
 
Sort by date Sort by votes
Nice. Easier than saving as IGES and making a new file.
 
Upvote 0 Downvote
What "Topology" means in this context?

Thanks!

CAD 2015
 
Upvote 0 Downvote
The poor man's definition of Topology is "Geometry" (such as points, lines, curves, surfaces, etc)
 
Upvote 0 Downvote
Who's the poor man?...……………..

CAD 2015
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

M
  • Locked
  • Question Question
Auto Answering Confirmation Window
Replies
0
Views
1K
mechacan
M
H
FROM CATIA V5 TO MAXSURF
Replies
0
Views
256
Hamzamd
H
L
CAD Model of EP3C40Q240C8N
Replies
1
Views
749
MrCATIA
M
H
  • Locked
  • Question Question
CATPart from Product name
Replies
3
Views
1K
hadzi11
H
R
  • Question Question
Problem when creating a function from two splines
Replies
0
Views
223
r1xn
R

Part and Inventory Search

Sponsor

Back
Top