Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

window to assign part attributes

Status
Not open for further replies.
studiotreccani

studiotreccani

Mechanical
Joined
Nov 28, 2012
Messages
80
Location
IT
thread561-354838

Hi
I've have tried the Iklo vb.
see the thread above.
Realy good.
There's a possibility to make it work on a "work part" (of the assembly)
even i'm in the assembly (displayed part).

Thanks in advance

NX 7.5
 
Status
Not open for further replies.

Similar threads

CADologist
  • Locked
  • Helpful tip Helpful tip
NX Journal - Assign Material to All bodies in part; Assign Description to "Description Attribut
Replies
0
Views
633
CADologist
CADologist
nyang
  • Question Question
Moving body from part back to assembly level part
Replies
3
Views
12K
Toost
Toost
W
  • Locked
  • Question Question
how to get graphics window coordinate?
Replies
0
Views
1K
wang.wei
W
Cmesserli
  • Locked
  • Question Question
Attributes NX
Replies
6
Views
1K
Toost
Toost
ManifestDestiny
  • Locked
  • Question Question
View and Modifying Attributes from Excel - how?
Replies
0
Views
1K
ManifestDestiny
ManifestDestiny

Part and Inventory Search

Sponsor

Back
Top