Does anyone have information on calculating wind loads on a rectangle at 45 deg?
This is not covered in AS1170.2.
See my post at
This is not covered in AS1170.2.
See my post at
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Wind loads on a rectangle at 45 deg?
- Thread starter sdz
- Start date
Similar threads
- Locked
- Article
- Locked
- Question
- Locked
- Question