Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Wind loading on netting/screens

Status
Not open for further replies.

connor61

Structural
Joined
Jul 27, 2001
Messages
8
Location
US
I seem to recall several years ago, a supervisor had a chart from an old Army TM or NAVFAC pub that helped compute wind loads on screens or netting.

Does anyone recall this design aid or know of where I can find information on computig wind loads on screens/netting?

Thanks
 
See thread507-143083.
 
I would use the ASCE 7 for open signs with force coefficients from fig 6-22 and section 6.5.15 of the 7-05 or figure 6-21 and section 6.5.13 of the 7-02.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top