Willamette I-Joists

[RacingAZ]

Hi! I'm looking for old allowable load tables or legacy ICBO report (PFC-4544) for this I-joist. I found out that they were bought by Weyerhaueuser a while back and the only old literature I can find is for I-joists up to 16" deep. The ICC site is not showing anything even for legacy reports search. The joists I'm trying to check at are 26" deep with 1 1/2"x3 1/2" LVL chords . Thanks!

 

[XR250]

geez, how thick is the web?

 

[mike20793]

You'll have to give Weyerhauser a call. They're usually very easy to work with and they should have what you are looking for.