Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

why wont copy clip or wblock work ?

Status
Not open for further replies.

jas1273

Mechanical
Joined
May 21, 2007
Messages
4
Location
US
is there a setting that prevents the copy clip or wblock command from working in acad 2002.
 
Don't know if it's what you're running into, but, on some drawings that we received from out-of-house, we couldn't copyclip anything from them, if we tried to include the dimensions (including leaders)

If that's what you're running into, we never found a way around it to get the dimensions. But, we could select everything in the drawing but dims and leaders and it would paste just fine.
 
There is a patch for this problem on the autodesk website for AutoCAD 2007. I haven't seen this problem in 2002 though.

Try searching the forums at Autodesk.

Zuccus

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top