Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
why hi oil perssure in engine
- Thread starter bigme
- Start date
this isn't my area of expertise but I would suspect either a different oil pump pumping more oil than your block was designed for, a defective pressure gauge or you have a bunch of your oil passages partially plugged or restricted thus the pump must put out more pressure to get the flow through the system.
- Status
Similar threads
- Question
- Locked
- Question
- Locked
- Question
- Locked
- Question