golfdogdave
Aerospace
- May 5, 2014
- 4
Why do I lose the section view lines when I create a section view from a view with break lines/
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
why do I lose section view lines when creating a section view form a broken view
- Thread starter golfdogdave
- Start date
- Status
- Thread starter
- #3
- Thread starter
- #4
golfdogdave
Aerospace
- May 5, 2014
- 4
I'm able to create the section view but once the view is placed the section line disappeares.
JohnRBaker
Mechanical
And you should be getting an on-screen notice of that fact.
This is a known issue but one that we have not yet addressed, mostly due to the fact that the priority is not very high since it appears that 'Section' views of 'Broken' views are considered a non-standard Drafting practice.
John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
Siemens PLM:
UG/NX Museum:
To an Engineer, the glass is twice as big as it needs to be.
This is a known issue but one that we have not yet addressed, mostly due to the fact that the priority is not very high since it appears that 'Section' views of 'Broken' views are considered a non-standard Drafting practice.
John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
Siemens PLM:
UG/NX Museum:
To an Engineer, the glass is twice as big as it needs to be.
- Status
Similar threads
