Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Why cannot use UG-28(f) for P>15 psi

Status
Not open for further replies.
AliGrailly

AliGrailly

Mechanical
Joined
Dec 8, 2020
Messages
72
Location
IR


Why cannot use Code UG-28(f) for vessel under external pressure greater than 15 psi ? it is depend on temperature Or material impacy testing ... another question is there temp l8mitation for 15psi and where can i find it in Asme section viii ?
 
Status
Not open for further replies.

Similar threads

strawhats2000
  • Locked
  • Question Question
Use of AI for learning and practicing structural design
2
Replies
25
Views
17K
rb1957
rb1957
Kakashi-01
  • Locked
  • Question Question
Exploring End-use Applications
Replies
0
Views
3K
Kakashi-01
Kakashi-01
W
  • Solved
Is this "thermo-couple" from my oven ok to use?
Replies
15
Views
2K
william_
W
M_U
  • Question Question
Use of eccentricities values to counter the torsion in ETABS.
Replies
2
Views
10K
human909
human909
Cary Yue
  • Locked
  • Question Question
How to use AISC Table 3-6? Why the unit is Kips for Uniform Load?
Replies
6
Views
1K
BulbTheBuilder
BulbTheBuilder

Part and Inventory Search

Sponsor

Back
Top