Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

who know's about Pro/program syntax

  • Thread starter Thread starter cole_trick
  • Start date Start date
Status
Not open for further replies.
C

cole_trick

Guest
If anyone can provide me the Pro/program syntax (operators, and, or, line changing, etc...)



Please!!!



cole
 
Maybe someone should publish an Pro/PROGRAM syntax guide.... Think that would be useful? I might be able to give it a shot...
 
can u mail me the exact requirement so i can help u
 
Status
Not open for further replies.

Similar threads

pmbov
  • Locked
  • Question Question
Creo 10 Pro/program Problems
Replies
7
Views
2K
3DDave
3DDave
Designer_D
  • Locked
  • Helpful tip Helpful tip
Original Pro/Engineer Blue Background Color Values (thread554-165973)
Replies
0
Views
2K
Designer_D
Designer_D
mattmyer
  • Locked
  • Question Question
Font Problems in Creo drawings
Replies
2
Views
2K
dgallup
dgallup
J
Pro-E Wildfire 4.0 Programming assistance needed !!
Replies
0
Views
3K
Joe Pie
J
W
Handling GA Model and GA drawing created using Pro-Program
Replies
0
Views
7K
write2bush
W

Part and Inventory Search

Sponsor

Back
Top