Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Which important tests required on crushed stone base?

Status
Not open for further replies.

defg

Structural
Joined
Jul 7, 2006
Messages
55
Location
EU
I'm current supervising a road designed to a bitumen stard-surface dressing.The pavement layers composes of stabilised base,crushed stone base(CRR)and surfacing.Now I'm at base course stage and in principal I have already analysing the most important tests required for the assessment of the rock to be used as stone base.The test already conducted are grading analysis,P.I,ACV,LAAV,SSS(5cycles)and TFVdry/TFVsoaked.Is pertographic analysis important in this case?and what else important tests to be conducted?
 
Sorry I didn't see this before. Actually it should be posted in another forum such as Road and Highway Engineering or Soil Testing Engineering....anyway

Unless you suspect some type of aggregate reactivity, I would not recommend petrography for this. Have you done abrasion testing? Even though it is a base material, and not subject to direct traffic abrasion, the test gives you a good idea of the aggregate's general durability.

My guess is that you are in UK,S. Africa, or Australia...your acronyms are unfamiliar to me. I'm in the US

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top