where is hole table icon?

[berri]

Hi guys,

I can't load the hole table icon on NX drawing. I have the part drawn in the NX draw module.
But the hole table icon it dosen't appear and I don't know why.

Thanks.

 

[Rob_N]

I think you have to turn on a variable, but I don't recall the correct one right now. I don't think it was ready for "prime time" so they took it out. But don't quote me on that, lol... I dont have access to the GTAC board anymore, but if you do you can find info on it there.

 

[Rob_N]

Here is what I have enabled in mine... for NX6, I enabled the Hole table but I do not think I ever used it as it was not parametric at the time...

UGII_DRAFTING_HOLE_TABLE = 1

UGII_ENABLE_TRANSFORM_LEGACY_OPTIONS = 1

^^^ I needed this one so my old macro's would work correctly
[CTRL-T] now has all the old functions back on

 

[berri]

Hi robnewcomb,

Thanks for the help, but I don't know it which archive I have to change these variables you have mention.
Can You explain me please, where I have to change these variables. I mean the steps I have to make to configure the hole table icon.

Thanks.

 

[Rob_N]

There are many ways to add them, you can add them to your UG start .bat file(if you use one) or edit the .cfg files(in UG install folder; not recommended).

I just add them as a user variable in windows control panel.
Goto Control Panel ->System then click on the advanced tab; Towards the bottom you'll see a Environment Variables button. Click that. Now you'll see 2 windows, One with your username and one for system. If you want to just turn them on for yourself add them as shown in the Picture below, If you want a system wide change for everyone who uses the computer you add it to the bottom window.

Just copy the text UGII_DRAFTING_HOLE_TABLE and paste into the variable name field and then enter the 1 in the Value field.

I am pretty sure that the hole table is not parametric, meaning it will not update if you change your model... I believe this is why they took it out by default. I have been out of maintenance for quite some time so it is possible that they fixed it