Guest
HOW IS THE WHEEL TEST FOR CORROSION ANALISYS?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Wheel test is useful for pre-screening products for corrosion inhibitor selection. It is not particularly useful as a predictive tool unless your system involves a set of bottles rotating on a frame!
Corrosion rates and percent protection obtained from these tests are suspect. You can use the test to throw out unsuitable products then test the survivors using a more rigorous test such as RCE or autoclave or , if you're wealthy, a flow loop.
Joe Boivin
Corrosion rates and percent protection obtained from these tests are suspect. You can use the test to throw out unsuitable products then test the survivors using a more rigorous test such as RCE or autoclave or , if you're wealthy, a flow loop.
Joe Boivin
- Status
Similar threads
- Locked
- Question
- Locked
- Question
